Start a conversation

Robot (Fanuc Teach Pedant)

Information related to the Teach Pendant of the robot

  • SRVO-038 Pulse mismatch

    SRVO-038 Pulse mismatch This document describes how to recover from a SRVO-038 Pulse mismatch alarm.The alarm is triggered when the encoder pulse count detected at power on is different from the one s...

  • Backup FANUC robot

    Backup FANUC robot A backup has to be made from the robot controller.Use this procedure to create a backup of the robot controller. Table of Contents 1. Use following tools 2. Procedure 2.1. Plug in t...

  • Apply DCS settings

    Apply DCS settings This document describes how to apply the DCS settings after they have been altered. Only change the settings as indicated by RoboJob.Do not change any DCS settings without permissio...

  • Update the robot software

    Update the robot software To fix a bug the software on the robot has to be updated.Use this procedure to update the software on the robot controller. Table of Contents 1. Use following tools 2. Proced...

  • FANUC Customer Registration

    FANUC Customer Registration FANUC implemented a registration system to track the location of their robots. Use this procedure to get an authentication key from FANUC.The robot will continue functionin...

  • Load new software files on FANUC robot

    Load new software files on FANUC robot RoboJob has send some files that have to be loaded on the robot controller. Use this procedure to load the files on the robot controller. Table of Contents 1. Us...

  • Check FANUC robot controller for errors

    Check FANUC robot controller for errors This document describes how to check the alarms on the Teach Pendant.It can be useful to see what alarms are active on the robot controller to find out why the ...

  • FANUC robot controller maintenance reminder

    FANUC robot controller maintenance reminder This document describes how to check the maintenance reminders on the Teach Pendant. Running hours are also displayed in these reminder settings. Table of C...

  • How to diagnose a robot with starting problems

    How to diagnose a robot with starting problems In certain versions of the robot controller software it can happen that the operating system on the robot does something wrong that makes it unresponsive...

  • Check/Change time and date on the robot

    Check/Change time and date on the robot This document describes how to view and change the time and date on your robot.It is important to set the time correctly because it is used to set timestamps in...